|
|
|
National Stock Number:
5935-00-501-0956
Federal Supply Class:
5935
National Item Identification Number:
005010956
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| 348-292-24000-01 | 02660 | AMPHENOL CORP SPECTRA-STRIP/ITD | | 348-292-24000-1 | 77820 | AMPHENOL CORP | | 650JS024N24-1 | 06324 | GLENAIR, INC. | | C20646 | 81755 | LOCKHEED MARTIN CORPORATION |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.655 INCHES MINIMUM AND 0.685 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.375 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | BAYONET PIN | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.375 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | HEAT RESISTANT | | OVERALL HEIGHT | 1.711 INCHES MAXIMUM | | OVERALL LENGTH | 0.760 INCHES MAXIMUM | | OVERALL WIDTH | 1.711 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | SHELL MATERIAL | ALUMINUM | | SHELL SURFACE TREATMENT | CHROMATE | | SHELL TYPE | SOLID | | UNTHREADED MOUNTING HOLE DIAMETER | 0.149 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
|
|