|
|
|
National Stock Number:
5935-00-494-4871
Federal Supply Class:
5935
National Item Identification Number:
004944871
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| 10-427405-253 | 77820 | AMPHENOL CORP | | C3558-25 | 81755 | LOCKHEED MARTIN CORPORATION | | DRP07C25S | 24805 | ESC TECHNOLOGIES INC |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.727 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.500 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | BAYONET PIN | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.500 INCHES NOMINAL | | OVERALL HEIGHT | 1.812 INCHES NOMINAL | | OVERALL LENGTH | 0.818 INCHES NOMINAL | | OVERALL WIDTH | 1.812 INCHES NOMINAL | | MATING END QUANTITY | 1 | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE | | SHELL TYPE | SOLID | | TEST DATA DOCUMENT | C3558-25-81755 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNTHREADED MOUNTING HOLE DIAMETER | 0.147 INCHES NOMINAL |
|
|