| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.453 INCHES MINIMUM AND 0.484 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.674 INCHES MINIMUM AND 1.684 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CONTACT POSITION ARRANGEMENT STYLE | FK-G10 SINGLE MATING END |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.674 INCHES MINIMUM AND 1.684 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT AND WEATHERPROOF |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14, TYPE MDG MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-P-19833, TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END |
| INSERT POSITION IN DEG | 0.0 AND 90.0 AND 270.0 |
| OVERALL HEIGHT | 2.109 INCHES MINIMUM AND 2.141 INCHES MAXIMUM |
| OVERALL LENGTH | 0.864 INCHES MINIMUM AND 0.896 INCHES MAXIMUM |
| OVERALL WIDTH | 2.109 INCHES MINIMUM AND 2.141 INCHES MAXIMUM |
| MATING END QUANTITY | 15 |
| NOMINAL THREAD SIZE | 1.812 INCHES |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY AND KEY, MULTIPLE KEY GROOVE |
| SHELL MATERIAL | ALUMINUM ALLOY AND CADMIUM |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | CADMIUM OR ZINC |
| SHELL TYPE | SOLID |
| THREAD CLASS | 2A AND 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 64 |
| THREAD SERIES DESIGNATOR | UN AND SPECIAL ACME |
| THREADED DEVICE TYPE | COUPLING FACILITY AND BACK SHELL |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.164 INCHES MINIMUM AND 0.174 INCHES MAXIMUM |