|
|
|
National Stock Number:
5935-00-478-7337
Federal Supply Class:
5935
National Item Identification Number:
004787337
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 372-5309-000 | 13499 | ROCKWELL COLLINS, INC. | | 7030-7P1004 | 03877 | GILBERT ENGINEERING CO INC/INCON SUB OF TRANSITRON ELECTRONIC CORP | | MM7-22PGDSS | 95238 | WINCHESTER INTERCONNECT CORPORATION | | UMI7MSSDM40 | 97954 | U S COMPONENTS INC |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | 7 SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 5.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION RESISTANT | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 7 SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-19833,TYPE GDI-30 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END | | OVERALL HEIGHT | 0.475 INCHES MINIMUM AND 0.485 INCHES MAXIMUM | | OVERALL LENGTH | 0.776 INCHES MINIMUM AND 0.786 INCHES MAXIMUM | | OVERALL WIDTH | 0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | NOMINAL THREAD LENGTH | 0.110 INCHES | | NOMINAL THREAD SIZE | 0.086 INCHES | | POLARIZATION METHOD | GUIDE PIN/SOCKET | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.007 GOLD GRAINS, TROY AND 0.007 SILVER GRAINS, TROY | | PRECIOUS MATERIAL | GOLD AND SILVER | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 56 | | THREAD SERIES DESIGNATOR | UNC | | THREADED DEVICE TYPE | MOUNTING STUD |
|
|