| BODY STYLE | STRAIGHT SHAPE |
| CABLE ENTRANCE DIAMETER | 0.085 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| CONTACT MATERIAL | COPPER ALLOY AND COPPER ALLOY 360 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613 FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626 FED SPEC 2ND MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM FREQUENCY RATING | 4.0 GIGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | BNC SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 500.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND SALT SPRAY PROOF AND VIBRATION RESISTANT AND SHOCK RESISTANT AND MOISTURE RESISTANT AND PRESSURE PROOF |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-D-1710 ASSN STD SINGLE MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END |
| OVERALL LENGTH | 1.125 INCHES NOMINAL |
| MATING END QUANTITY | 1 |
| OPERATING TEMP RATING | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| PRECIOUS MATERIAL AND LOCATION | CONTACT AND SHELL SURFACES SILVER |
| PRECIOUS MATERIAL AND WEIGHT | 0.105 SILVER GRAINS, TROY |
| PRECIOUS MATERIAL | SILVER |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,COMPOSITION 11,HALF HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-626,HALF HARD FED SPEC 2ND MATERIAL RESPONSE |
| SHELL MATERIAL | COPPER ALLOY AND COPPER ALLOY 360 |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | SILVER |
| SHELL TYPE | SOLID |
| WIDTH ACROSS FLATS | 0.500 INCHES NOMINAL |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |