|
|
|
National Stock Number:
5935-00-470-8848
Federal Supply Class:
5935
National Item Identification Number:
004708848
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| M83723-2F2241N | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC83723-2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.556 INCHES MINIMUM AND 0.587 INCHES MAXIMUM | | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.250 INCHES NOMINAL | | CONNECTOR LOCKING METHOD | BAYONET PIN | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | 22-41 SINGLE MATING END | | OVERALL WIDTH | 1.578 INCHES NOMINAL | | MATING END QUANTITY | 1 | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | ANODIZE | | SHELL TYPE | SOLID | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACE GOLD | | PRECIOUS MATERIAL | GOLD | | THREAD SERIES DESIGNATOR | UNEF | | THREADED DEVICE TYPE | BACK SHELL | | UNTHREADED MOUNTING HOLE DIAMETER | 0.120 INCHES NOMINAL | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 81349-MILC83723 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 20.0 SINGLE MATING END 1ST CONTACT GROUPING | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 SINGLE MATING END 2ND CONTACT GROUPING | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.250 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | HEAT RESISTANT AND MOISTURE RESISTANT AND OIL TIGHT AND SALT WATER RESISTANT AND VIBRATION RESISTANT | | INCLUDED CONTACT QUANTITY | 14 SINGLE MATING END 1ST CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 27 SINGLE MATING END 2ND CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INSERT MATERIAL | PLASTIC SINGLE MATING END | | INSERT POSITION IN DEG | 0.0 | | NOMINAL THREAD LENGTH | 0.290 INCHES | | NOMINAL THREAD SIZE | 1.312 INCHES | | OVERALL HEIGHT | 1.578 INCHES NOMINAL | | OVERALL LENGTH | 1.552 INCHES NOMINAL |
|
|