6105-00-436-1789 MOTOR,DIRECT CURRENT Index 6105-00-436-1791 INSERT,MOTOR

National Stock Number:
5935-00-436-1790

Federal Supply Class:
5935

National Item Identification Number:
004361790

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
MIL-C-501581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS3402D20-7P96906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BODY STYLESTRAIGHT SHAPE, EXTERNAL COUPLING W/BACKSHELL
CONTACT POSITION ARRANGEMENT STYLE20-7 SINGLE MATING END
TERMINAL LOCATIONBACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPECRIMP SINGLE MATING END ALL CONTACT GROUPINGS
INCLUDED CONTACT TYPEROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS
INCLUDED CONTACT QUANTITY4 SINGLE MATING END 1ST CONTACT GROUPING
4 SINGLE MATING END 2ND CONTACT GROUPING
MATING END QUANTITY1
OVERALL LENGTH1.662 INCHES MAXIMUM
OVERALL HEIGHT1.469 INCHES MINIMUM AND
1.531 INCHES MAXIMUM
OVERALL WIDTH1.469 INCHES MINIMUM AND
1.531 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT1.140 INCHES MINIMUM AND
1.172 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH1.140 INCHES MINIMUM AND
1.172 INCHES MAXIMUM
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.750 INCHES MINIMUM AND
0.781 INCHES MAXIMUM
UNTHREADED MOUNTING HOLE DIAMETER0.115 INCHES MINIMUM AND
0.130 INCHES MAXIMUM
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
THREADED DEVICE TYPECOUPLING FACILITY
THREAD SERIES DESIGNATORUNEF
NOMINAL THREAD SIZE1.250 INCHES
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD LENGTH0.625 INCHES
SHELL TYPESOLID
SHELL MATERIALALUMINUM ALLOY
SHELL SURFACE TREATMENTCADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
POLARIZATION METHODKEYWAY OR MULTIPLE KEYWAY
INSERT POSITION IN DEG0.0
CONTACT REMOVABILITYREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM CURRENT RATING IN AMPS22.0 SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS500.0 SINGLE MATING END 1ST CONTACT GROUPING
900.0 SINGLE MATING END 2ND CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS700.0 SINGLE MATING END 1ST CONTACT GROUPING
1250.0 SINGLE MATING END 2ND CONTACT GROUPING
ENVIRONMENTAL PROTECTIONMOISTURE RESISTANT AND
SALT WATER RESISTANT AND
VIBRATION RESISTANT
TEST DATA DOCUMENT81349-MIL-C-5015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SPECIFICATION/STANDARD DATA81349-MIL-C-5015 GOVERNMENT SPECIFICATION
SPEC/STD CONTROLLING DATA
MANUFACTURERS CODE81349
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-C-5015
MANUFACTURERS CODE96906
DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMS3402D20-7P


Click here to Register for Free 30-day Trial