|
|
|
National Stock Number:
5935-00-435-3828
Federal Supply Class:
5935
National Item Identification Number:
004353828
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| MIL-C-26482 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3122E18-32SZ | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CONTACT POSITION ARRANGEMENT STYLE | 18-32 SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 32 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.266 INCHES MAXIMUM | | OVERALL HEIGHT | 1.328 INCHES MAXIMUM | | OVERALL WIDTH | 1.328 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.062 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.062 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.431 INCHES MINIMUM AND | | 0.462 INCHES MAXIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES MINIMUM AND | | 0.125 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | BAYONET PIN | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | INSERT POSITION IN DEG | 265.0 | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 600.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD AND | | COPPER SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND | | SALT WATER RESISTANT AND | | VIBRATION RESISTANT | | TEST DATA DOCUMENT | 81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.032 GOLD GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | SPECIAL FEATURES | HERMETIC SEAL | | SPECIFICATION/STANDARD DATA | 96906-MS3122 GOVERNMENT STANDARD | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-C-26482 | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS3122E18-32SZ |
|
|