|
|
|
National Stock Number:
5935-00-116-6544
Federal Supply Class:
5935
National Item Identification Number:
001166544
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 223-476-9002 | 70210 | HONEYWELL INTERNATIONAL INC. | | DPDR100-33P3AS | 71468 | ITT CANNON LLC |
|
Techincal Specification:
| BODY STYLE | RECTANGULAR SHAPE | | CONTACT POSITION ARRANGEMENT STYLE | 100 SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 100 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 3.359 INCHES MINIMUM AND | | 3.391 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.968 INCHES MINIMUM AND | | 2.978 INCHES MAXIMUM | | OVERALL HEIGHT | 1.905 INCHES MINIMUM AND | | 1.915 INCHES MAXIMUM | | OVERALL WIDTH | 1.984 INCHES MINIMUM AND | | 2.016 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.344 INCHES MINIMUM AND | | 1.375 INCHES MAXIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.143 INCHES MINIMUM AND | | 0.149 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | JACKSCREW | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 32 | | THREAD DIRECTION | RIGHT-HAND | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | POLARIZATION METHOD | JACKSCREW | | INSERT MATERIAL | RUBBER SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 10.0 SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | SHOCK RESISTANT AND | | VIBRATION RESISTANT AND | | HUMIDITY RESISTANT AND | | SALT WATER RESISTANT AND | | THERMAL SHOCK RESISTANT | | PRECIOUS MATERIAL | SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.100 SILVER GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES SILVER | | SPECIAL FEATURES | JACKSCREW TYPE-MALE AND LOCATION-LEFT HANDANDJACKSCREW TYPE-MALE AND LOCATION-RIGHT HAND |
|
|