|
|
|
National Stock Number:
5935-00-110-9183
Federal Supply Class:
5935
National Item Identification Number:
001109183
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 5040-42S | 03877 | GILBERT ENGINEERING CO INC/INCON SUB OF TRANSITRON ELECTRONIC CORP |
|
Techincal Specification:
| BODY STYLE | RECTANGULAR SHAPE | | CONTACT POSITION ARRANGEMENT STYLE | 42 SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 42 SINGLE MATING END SINGLE CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.790 INCHES MINIMUM AND | | 1.830 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.557 INCHES MINIMUM AND | | 1.567 INCHES MAXIMUM | | OVERALL HEIGHT | 0.560 INCHES MINIMUM AND | | 0.600 INCHES MAXIMUM | | OVERALL WIDTH | 0.495 INCHES MINIMUM AND | | 0.505 INCHES MAXIMUM | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.338 INCHES MINIMUM AND | | 0.348 INCHES MAXIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.074 INCHES MINIMUM AND | | 0.106 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | JACKSCREW-SOCKET | | THREADED DEVICE TYPE | COUPLING FACILITY AND | | MOUNTING STUD | | THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD SIZE | 0.099 INCHES AND | | 0.086 INCHES | | THREAD CLASS | 2A AND | | 2B | | THREAD QUANTITY PER INCH | 48 AND | | 56 | | THREAD DIRECTION | RIGHT-HAND | | POLARIZATION METHOD | JACKSCREW | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE SINGLE MATING END | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END | | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | GOLD AND | | COPPER SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 TYPE II,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | FIRE RESISTANT | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND WEIGHT | 0.042 GOLD GRAINS, TROY | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | SPECIAL FEATURES | JACKSCREW TYPE-FEMALE AND LOCATION-LEFT HANDANDJACKSCREW TYPE-MALE AND LOCATION-RIGHT HAND |
|
|