| CONTACT LOAD CURRENT RATING | 125.0 MILLIAMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 75.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES SINGLE SECTION REAR |
| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 28.0 DC AT SEA LEVEL |
| FIRST FLAT LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM SINGLE ACTUATOR |
| FLAT HEIGHT | 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM SINGLE ACTUATOR |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| INDIVIDUAL SECTION QUANTITY | 1 |
| OVERALL DIAMETER | 0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| OVERALL LENGTH | 1.587 INCHES MINIMUM AND 1.733 INCHES MAXIMUM |
| MOUNTING METHOD | THREADED BUSHING SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.250 INCHES SINGLE MOUNTING FACILITY |
| NONTURN DEVICE RADIUS | 0.245 INCHES MINIMUM AND 0.275 INCHES MAXIMUM AT 3:00 O'CLOCK |
| NONTURN DEVICE TYPE | TAB AT 3:00 O'CLOCK |
| OPERATING TEMP RANGE | -65.0 TO 85.0 CELSIUS |
| POLE QUANTITY | 1 SINGLE SECTION FRONT |
| ROTOR THROUGH CONNECTION QUANTITY | 1 SINGLE SECTION |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 180.0 DEGREES FROM CONTACT POSITION 1 SINGLE ACTUATOR |
| SHAFT DIAMETER | 0.123 INCHES MINIMUM AND 0.126 INCHES MAXIMUM SINGLE ACTUATOR |
| SHAFT TYPE | ROUND, FLATTED SINGLE ACTUATOR |
| SHAFT LENGTH | 0.647 INCHES MINIMUM AND 0.727 INCHES MAXIMUM SINGLE ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 4 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 45.0 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-S-3786 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| THROW QUANTITY | 4 SINGLE SECTION REAR |