|
|
|
National Stock Number:
5930-00-501-4957
Federal Supply Class:
5930
National Item Identification Number:
005014957
Description:
SWITCH,PUSH
Detail:
A switch that is externally actuated by a device such as a push rod or button, which requires pushing for each actuation. The action may be momentary, with mechanical return. The actuating device may or may not be an integral part of the switch. The item may include provisions for mounting indicating lamp(s) or light emitting diode(s) in the actuator. Includes items consisting of individually separable switches that are physically interlocked, that have a common actuator, or are electrically connected. Excludes LIGHT-SWITCH; LIGHT-SWITCH ASSEMBLY; SWITCH, BEAM SELECTING, HEADLIGHT; SWITCH, FOOT; SWITCH, INTERLOCK; SWITCH, PRESSURE; SWITCH, PUSH-PULL; SWITCH, SENSITIVE and SWITCH ASSEMBLY. For devices which start, stop, reverse, select and/or regulate the speed of a motor, see STARTER, MOTOR and CONTROLLER, MOTOR.
|
Manufacturer Information:
| 312A1178P1 | 89954 | BAE SYSTEMS CONTROLS INC. | | 355-212-001 | 07421 | L3HARRIS INTERSTATE ELECTRONICS CORPORATION | | 71341231-001 | 04939 | LOCKHEED MARTIN CORPORATION | | MIL-PRF-8805/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILS8805-3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS25089-1F | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | P1-60010 | 21649 | OTTO ENGINEERING INC | | NX301FB1B | 28986 | AMPHENOL CORPORATION | | MS25089-1F | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ACTUATOR COLOR | BLACK SINGLE ACTUATOR | | ACTUATOR DIAMETER | 0.370 INCHES MINIMUM AND 0.377 INCHES MAXIMUM | | ACTUATOR HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM | | ACTUATOR STYLE | ROUND | | BODY DIAMETER | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM | | BODY LENGTH | 0.888 INCHES MINIMUM AND 0.920 INCHES MAXIMUM | | BODY STYLE | BUSHING MOUNTED | | BUSHING LENGTH | 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM | | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 10.000 AMPERES RESISTIVE DC AND 3.000 AMPERES INDUCTIVE DC AND 3.000 AMPERES LAMP DC AND 10.000 AMPERES RESISTIVE AC AND 5.000 AMPERES INDUCTIVE AC AND 3.000 AMPERES LAMP AC | | FEATURES PROVIDED | ACTUATOR SEAL | | INCLOSURE TYPE | FULLY INCLOSED | | OVERALL HEIGHT | 0.875 INCHES NOMINAL | | OVERALL LENGTH | 1.375 INCHES MAXIMUM | | OVERALL WIDTH | 0.875 INCHES NOMINAL | | MAXIMUM VOLTAGE RATING IN VOLTS | 115.0 AC AND 28.0 DC | | MOUNTING METHOD | THREADED BUSHING | | NOMINAL THREAD SIZE | 0.625 INCHES | | NONPILE-UP CONTACT ARRANGEMENT | 1 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION SINGLE SWITCH UNIT | | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 81349-MIL-S-8805 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNEF |
|
|