|
|
|
National Stock Number:
5930-00-459-3270
Federal Supply Class:
5930
National Item Identification Number:
004593270
Description:
SWITCH,TOGGLE
Detail:
A switch which is externally actuated by a lever and whose contacts open and close with an instantaneous (snap) action; includes items having one or more momentary positions. Includes switches (snap action) which use mercury to bridge contacts, and assemblages of complete switches (snap action) having common actuators. Excludes SWITCH, LEVER; SWITCH, ROTARY; SWITCH, KNIFE; SWITCH, SENSITIVE; and SWITCH, BOX.
|
Manufacturer Information:
| 10240060-2 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 2TL171-3 | 91929 | HONEYWELL INTERNATIONAL INC. | | 2TL256-3 | 91929 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| ACTUATOR DIAMETER | 0.240 INCHES NOMINAL | | ACTUATOR HEIGHT | 0.720 INCHES MAXIMUM | | ACTUATOR STYLE | ROUND | | ACTUATOR POSITION-ACTION RELATIONSHIP | UP POSITION MAINTAINED AND DOWN POSITION MAINTAINED | | BODY HEIGHT | 1.120 INCHES MAXIMUM | | BODY LENGTH | 1.340 INCHES MAXIMUM | | BODY STYLE | BUSHING MOUNT | | BODY WIDTH | 0.910 INCHES MAXIMUM | | BUSHING LENGTH | 0.490 INCHES MAXIMUM | | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 10.000 AMPERES RESISTIVE DC AND 7.500 AMPERES INDUCTIVE DC AND 3.500 AMPERES LAMP DC AND 7.500 AMPERES RESISTIVE AC AND 7.500 AMPERES INDUCTIVE AC AND 2.000 AMPERES LAMP AC | | INCLOSURE TYPE | HERMETICALLY SEALED | | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.370 INCHES MAXIMUM | | NOMINAL THREAD SIZE | 0.469 INCHES | | NONPILE-UP CONTACT ARRANGEMENT | 2 POLE, DOUBLE THROW, BOTH POSITIONS MAINTAINED SINGLE SWITCH UNIT | | MAXIMUM VOLTAGE RATING IN VOLTS | 57.5 AC AND 14.0 DC | | MOUNTING METHOD | THREADED BUSHING | | THREAD QUANTITY PER INCH | 32 | | THREAD SERIES DESIGNATOR | UNS | | SWITCH ACTUATOR QUANTITY | 1 | | TERMINAL TYPE AND QUANTITY | 6 SCREW | | TEST DATA DOCUMENT | 18876-10240060-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|