| CONTACT LOAD CURRENT RATING | 5.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 5.0 AMPERES RESISTIVE LOAD DC AT SEA LEVEL |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION FRONT |
| CONTACT VOLTAGE RATING IN VOLTS | 125.0 AC AT SEA LEVEL |
| CONTACT VOLTAGE RATING IN VOLTS | 5.0 DC AT SEA LEVEL |
| FEATURES PROVIDED | ACTUATOR KNOB |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | WATERTIGHT |
| INDIVIDUAL SECTION QUANTITY | 15 |
| KNOB MANUFACTURER CODE | 82121 |
| KNOB MANUFACTURER PART NUMBER | H |
| KNOB SPECIAL MARKINGS | ARR0W |
| LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 2.296 INCHES NOMINAL SECOND MOUNTING FACILITY |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 2.296 INCHES NOMINAL SECOND MOUNTING FACILITY |
| POLE QUANTITY | 1 EACH SECTION FRONT |
| PRECIOUS MATERIAL AND LOCATION | CONTACT AND ROTOR BLADE SURFACES SILVER |
| PRECIOUS MATERIAL | SILVER |
| MOUNTING FACILITY PATTERN | FOUR POSITION RECTANGULAR SECOND MOUNTING FACILITY |
| MOUNTING METHOD | THREADED BUSHING FIRST MOUNTING FACILITY |
| MOUNTING METHOD | UNTHREADED HOLE(S) SECOND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.625 INCHES FIRST MOUNTING FACILITY |
| OPERATING TEMP RANGE | -55.0 TO 85.0 CELSIUS |
| OVERALL HEIGHT | 2.812 INCHES NOMINAL |
| OVERALL LENGTH | 9.812 INCHES NOMINAL |
| OVERALL WIDTH | 2.812 INCHES NOMINAL |
| STYLE DESIGNATOR | TAP, CIRCUIT SELECTOR |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 16 SINGLE ACTUATOR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 22.5 DEGREES SINGLE ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | ADJUSTABLE STOP SINGLE ACTUATOR |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| TERMINAL TYPE | TAB W/SCREW |
| TEST DATA DOCUMENT | 81349-MIL-S-21604 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD LENGTH | 0.312 INCHES NOMINAL FIRST MOUNTING FACILITY |
| THREAD CLASS | 2A FIRST MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF FIRST MOUNTING FACILITY |
| THROW QUANTITY | 15 EACH SECTION FRONT |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.201 INCHES NOMINAL SECOND MOUNTING FACILITY |