| CONTACT VOLTAGE RATING IN VOLTS | 115.0 AC AT SEA LEVEL |
| 28.0 DC AT SEA LEVEL |
| CONTACT LOAD CURRENT RATING | 750.0 MILLIAMPERES RESISTIVE LOAD AC AT SEA LEVEL |
| 250.0 MILLIAMPERES RESISTIVE LOAD AND |
| 100.0 MILLIAMPERES INDUCTIVE LOAD DC AT SEA LEVEL |
| TERMINAL TYPE | TAB, SOLDER LUG |
| SWITCH ACTUATOR INDEXING POSITION QUANTITY | 6 1ST ACTUATOR |
| 6 2ND ACTUATOR |
| STYLE DESIGNATOR | TAP, CIRCULAR, BUSHING MOUNT |
| OVERALL LENGTH | 4.197 INCHES MINIMUM AND |
| 4.243 INCHES MAXIMUM |
| OVERALL DIAMETER | 1.155 INCHES MINIMUM AND |
| 1.185 INCHES MAXIMUM |
| INDIVIDUAL SECTION QUANTITY | 4 |
| SWITCH CONTACT BASIC DESIGN | NONPILE-UP SYMMETRICAL |
| ROTOR THROUGH CONNECTION QUANTITY | 2 EACH SECTION |
| POLE QUANTITY | 2 EACH SECTION FRONT |
| THROW QUANTITY | 6 EACH SECTION REAR |
| CONTACT SWITCHING ACTION | BREAKS BEFORE MAKES EACH SECTION REAR |
| SWITCH ACTUATOR POSITIONING INCREMENT | 30.0 DEGREES 1ST ACTUATOR |
| 30.0 DEGREES 2ND ACTUATOR |
| SWITCH ACTUATOR STOP DEVICE TYPE | FIXED STOP ALL ACTUATORS |
| SHAFT TYPE | ROUND, HOLLOWED, FLATTED 1ST ACTUATOR |
| ROUND, FLATTED 2ND ACTUATOR |
| FIRST FLAT LENGTH | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| 0.250 INCHES NOMINAL 2ND ACTUATOR |
| FLAT HEIGHT | 0.219 INCHES NOMINAL 1ST ACTUATOR |
| 0.094 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL 1ST ACTUATOR |
| 0.125 INCHES NOMINAL 2ND ACTUATOR |
| SHAFT LENGTH | 0.937 INCHES NOMINAL 1ST ACTUATOR |
| 1.437 INCHES NOMINAL 2ND ACTUATOR |
| NONTURN DEVICE TYPE | SLOTTED BUSHING AT 3:00 O'CLOCK |
| MOUNTING METHOD | THREADED BUSHING W/PANEL SEAL SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNEF SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.375 INCHES SINGLE MOUNTING FACILITY |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.375 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | EXPLOSION PROOF |
| SHAFT FLAT/SLOT ANGULAR LOCATION | 180.0 DEGREES FROM CONTACT POSITION 1 1ST ACTUATOR |
| 180.0 DEGREES FROM CONTACT POSITION 1 2ND ACTUATOR |
| OPERATING TEMP RANGE | -65.0 TO 125.0 DEG CELSIUS |