| FUSE ACCOMMODATION QUANTITY | 1 |
| CURRENT CARRYING RATING IN AMPS | 20.0 |
| VOLTAGE IN VOLTS | 250.0 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| CONTACT MATERIAL | COPPER |
| BODY STYLE | FRONT PANEL MOUNTED TYPE |
| CONTACT SURFACE TREATMENT | SILVER PLATED, QQ-S-365 |
| OVERALL LENGTH | 2.844 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.765 INCHES MINIMUM AND |
| 1.797 INCHES MAXIMUM |
| OVERALL WIDTH | 1.109 INCHES MINIMUM AND |
| 1.141 INCHES MAXIMUM |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 1.046 INCHES MINIMUM AND |
| 1.078 INCHES MAXIMUM |
| CAP DIAMETER | 1.109 INCHES MINIMUM AND |
| 1.141 INCHES MAXIMUM |
| MOUNTING HOLE STYLE | BUSHING MOUNTING W/2 HOLES |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 1.296 INCHES MINIMUM AND |
| 1.328 INCHES MAXIMUM |
| BUSHING HOLE DIAMETER | 0.875 INCHES MINIMUM AND |
| 0.907 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 2 |
| MOUNTING HOLE DIAMETER | 0.172 INCHES MINIMUM AND |
| 0.204 INCHES MAXIMUM |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL |
| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL |
| INTERRUPTION INDICATOR METHOD | NEON LAMP |
| RESISTOR RATING | 120.0 KILOHMS |
| INDICATING LAMP VOLTAGE RANGE IN VOLTS | 90.0 TO 250.0 |
| TEST DATA DOCUMENT | 81349-MIL-F-19207/15 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TERMINAL SURFACE TREATMENT | SOLDER DIP AND |
| TIN PLATED |
| BODY MATERIAL | PLASTIC, DIALLYL PHTHALATE, MIL-M-14, TYPE SDG AND |
| PLASTIC, POLYESTER, MIL-M-14, TYPE MAI-60 AND |
| PLASTIC, DIALLYL PHTHALATE, MIL-M-19833, TYPE GDI-30F |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | FHL25U |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-F-19207/15 |