| BODY LENGTH | 4.000 INCHES NOMINAL |
| BODY WIDTH | 2.251 INCHES MINIMUM AND 2.260 INCHES MAXIMUM |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 60.0 NOMINAL BLANK AND 6.0 NOMINAL BLANK 1ST FUNCTION |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 4.176 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.437 INCHES NOMINAL |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE INPUT 1ST FUNCTION |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE OUTPUT 2ND FUNCTION |
| FREQUENCY BAND WIDTH PER FUNCTION | 179.00 KILOHERTZ BLANK AND 220.00 KILOHERTZ BLANK |
| INCLOSURE TYPE | ENCAPSULATED |
| INPUT IMPEDANCE PER FUNCTION W/LOAD | 50.0 OHMS BLANK |
| INPUT TERMINAL IDENTIFICATION | 2112-06-4 |
| INPUT TERMINAL MANUFACTURER CODE | 80045 |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 6.0 BLANK |
| LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK |
| OUTPUT IMPEDANCE PER FUNCTION W/SOURCE ACROSS INPUT | 50.0 OHMS BLANK |
| OUTPUT TERMINAL IDENTIFICATION | 2112-06-4 |
| OUTPUT TERMINAL MANUFACTURER CODE | 80045 |
| OVERALL HEIGHT | 0.874 INCHES MINIMUM AND 0.884 INCHES MAXIMUM |
| OVERALL LENGTH | 4.588 INCHES MINIMUM AND 4.597 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| PRINCIPAL CIRCUITRY TYPE PER FUNCTION | INDUCTANCE-CAPACITANCE BLANK |
| REFERENCE FREQUENCY PER FUNCTION | 200.0 KILOHERTZ BLANK |
| SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 160.00 KILOHERTZ BLANK AND 179.00 KILOHERTZ BLANK AND 220.00 KILOHERTZ BLANK AND 260.00 KILOHERTZ BLANK |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| TEST DATA DOCUMENT | 80045-ES361834 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.140 INCHES NOMINAL |