|
|
|
National Stock Number:
5915-00-450-8721
Federal Supply Class:
5915
National Item Identification Number:
004508721
Description:
FILTER,RADIO FREQUENCY INTERFERE
Detail:
An item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. Excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. Excludes FILTER, LOW PASS and SUPPRESSOR, IGNITION INTERFERENCE. For items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see FILTER, BAND SUPPRESSION and FILTER, BAND PASS. See also LIMITER, ELECTRICAL NOISE.
|
Manufacturer Information:
| 11726308-1 | 19200 | US ARMY ARDEC RDECOM | | 2994447 | 87557 | LOCKHEED CORP LOCKHEED ELECTRONICS CO INC | | 5172 | 23160 | LINDGREN RF ENCLOSURES INC ELMAG DIV | | E-1476 | 23160 | LINDGREN RF ENCLOSURES INC ELMAG DIV | | F-20399-1 | 96733 | SFE TECHNOLOGIES | | 5915004508721 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | | RF02391-2 | 13619 | EMS DEVELOPMENT CORPORATION | | RF2391-2 | 13619 | EMS DEVELOPMENT CORPORATION |
|
Techincal Specification:
| BODY LENGTH | 1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM | | BODY OUTSIDE DIAMETER | 0.655 INCHES MINIMUM AND 0.685 INCHES MAXIMUM | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG INPUT 1ST FUNCTION | | FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 TAB, SOLDER LUG OUTPUT 2ND FUNCTION | | INCLOSURE TYPE | ENCASED | | LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK | | OVERALL LENGTH | 2.370 INCHES NOMINAL | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED BUSHING | | MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC | | NOMINAL THREAD SIZE | 0.250 INCHES | | OPERATING CURRENT RATING PER FUNCTION IN AMPS | 1.0 BLANK | | OPERATING VOLTAGE RATING AND TYPE PER FUNCTION | 28.0 VOLTS DC BLANK | | SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK | | STYLE DESIGNATOR | ROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES | | TEST DATA DOCUMENT | 87557-9118C6031 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|