| REFERENCE FREQUENCY PER FUNCTION | 61.0 MEGAHERTZ BLANK |
| INSERTION LOSS AT REFERENCE FREQUENCY PER FUNCTION IN DECIBELS | 10.0 BLANK |
| INCLOSURE TYPE | ENCAPSULATED |
| FREQUENCY BAND WIDTH PER FUNCTION | 59.00 MEGAHERTZ BLANK AND |
| 63.00 MEGAHERTZ BLANK |
| FUNCTIONAL TERMINAL TYPE AND QUANTITY | 1 CONNECTOR, RECEPTACLE INPUT 1ST FUNCTION |
| 1 CONNECTOR, RECEPTACLE OUTPUT 2ND FUNCTION |
| STYLE DESIGNATOR | RECTANGULAR TERMINAL/TERMINALS ON TWO SURFACES |
| SOURCE IMPEDANCE RATING PER FUNCTION | 50.0 OHMS BLANK |
| LOAD IMPEDANCE PER FUNCTION | 50.0 OHMS BLANK |
| OVERALL LENGTH | 4.478 INCHES MINIMUM AND |
| 4.522 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.660 INCHES MAXIMUM |
| BODY LENGTH | 4.478 INCHES MINIMUM AND |
| 4.522 INCHES MAXIMUM |
| BODY HEIGHT | 1.100 INCHES MAXIMUM |
| BODY WIDTH | 2.226 INCHES MINIMUM AND |
| 2.234 INCHES MAXIMUM |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.161 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 4.125 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.875 INCHES NOMINAL |
| TEST DATA DOCUMENT | 19200-10549196 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SPECIFIED FREQUENCIES OF DISCRIMINATION PER FUNCTION | 54.00 MEGAHERTZ BLANK AND |
| 59.00 MEGAHERTZ BLANK AND |
| 63.00 MEGAHERTZ BLANK AND |
| 68.00 MEGAHERTZ BLANK |
| DISCRIMINATION AT SPECIFIED FREQUENCIES PER FUNCTION IN DECIBELS | 54.0 MINIMUM BLANK AND |
| 12.0 MINIMUM BLANK AND |
| 62.0 MINIMUM BLANK 1ST FUNCTION |
| AVERAGE POWER RATING PER FUNCTION | 1.0 WATTS BLANK |
| OPERATING TEMP RANGE | -40.0 TO 175.0 DEG FAHRENHEIT |
| BODY MATERIAL | METAL |
| SPECIAL FEATURES | BOTH TERMINALS ON ONE SURFACE |