|
|
|
National Stock Number:
5910-00-577-1887
Federal Supply Class:
5910
National Item Identification Number:
005771887
Description:
CAPACITOR,FIXED,ELECTROLYTIC
Detail:
A capacitor, whose capacitance value cannot be adjusted or varied, having a chemically formed film as the dielectric. It may be a single unit, or consist of two or more fixed units which cannot be separated.
|
Manufacturer Information:
| 5M.5275.220.95 | D1901 | HENSOLDT SENSORS GMBH | | 5M5275-220-48 | D1901 | HENSOLDT SENSORS GMBH | | CL45BJ600MP3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CL64BJ600MP3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CL65BJ600MP3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CL65BJ600MPE | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CL67BJ600MPG | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC3965-24 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ELECTRICAL POLARIZATION | POLARIZED | | BODY DIAMETER | 0.406 INCHES MAXIMUM | | BODY LENGTH | 0.921 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 60.000 MICROFARADS SINGLE SECTION | | CAPACITIVE ELECTRODE MATERIAL | TANTALUM | | CASE INSULATION MATERIAL | PLASTIC | | DC LEAKAGE AT REFERENCE TEMP | 2.000 MICROAMPERES | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.00 CELSIUS MAXIMUM | | POWER FACTOR AT REFERENCE TEMP IN PERCENT | 13.5000 | | RELIABILITY INDICATOR | ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL | | TERMINAL DIAMETER | 0.025 INCHES NOMINAL | | TERMINAL LENGTH | 1.500 INCHES NOMINAL | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 81349-MILC3965-24 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | TOLERANCE RANGE PER SECTION | -20.00 TO 20.00 PERCENT SINGLE SECTION |
|
|