| ELECTRICAL POLARIZATION | POLARIZED |
| ANODE TYPE | SOLID |
| BODY DIAMETER | 0.312 INCHES MAXIMUM |
| BODY LENGTH | 0.625 INCHES MINIMUM AND 0.672 INCHES MAXIMUM |
| BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS |
| CAPACITANCE VALUE PER SECTION | 100.000 MICROFARADS SINGLE SECTION |
| CAPACITIVE ELECTRODE MATERIAL | TANTALUM |
| CASE INSULATION MATERIAL | PLASTIC |
| DC LEAKAGE AT MAXIMUM OPERATING TEMP | 10.0 MICROAMPERES |
| DC LEAKAGE AT REFERENCE TEMP | 1.000 MICROAMPERES |
| DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 31.400 |
| FEATURES PROVIDED | HERMETICALLY SEALED CASE |
| IMPEDANCE AT MINIMUM OPERATING TEMP IN OHMS | 50.0 |
| MIL-STD-1276 WIRE LEAD TYPE DESIGNATOR | N-3 |
| NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 25.0 DC SINGLE SECTION |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| SCHEMATIC DIAGRAM DESIGNATOR | ELECTRODE(S) GROUNDED TO CASE, W/GND TERMINAL |
| SPECIFICATION/STANDARD DATA | 98230-0N089590-1 MANUFACTURERS SPECIFICATION CONTROL |
| TERMINAL DIAMETER | 0.023 INCHES MINIMUM AND 0.027 INCHES MAXIMUM |
| TERMINAL LENGTH | 2.000 INCHES MINIMUM AND 2.500 INCHES MAXIMUM |
| TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD |
| TEST DATA DOCUMENT | 98230-0N089590-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION |