| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 2 SLOTTED SCREW |
| ADJUSTMENT DEVICE TORQUE | 4.000 INCH-OUNCES MINIMUM AND 24.000 INCH-OUNCES MAXIMUM |
| BODY HEIGHT | 0.406 INCHES MAXIMUM |
| BODY LENGTH | 1.300 INCHES NOMINAL |
| BODY STYLE | ROTARY |
| BODY WIDTH | 0.880 INCHES NOMINAL |
| CAPACITANCE CHANGE IN PERCENT AT OPERATING TEMP FROM 25 DEG CELSIUS | +1.50 TO 7.00 MINIMUM AND -5.00/-1.50 MAXIMUM ALL SECTIONS |
| CAPACITANCE DRIFT IN PICOFARADS | 0.50 ALL SECTIONS |
| CAPACITANCE RANGE IN PICOFARADS | +5.0 TO 30.0 ALL SECTIONS |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.625 INCHES NOMINAL |
| DISSIPATION FACTOR AT 25 DEG CELSIUS IN PERCENT | 0.2 |
| INCLOSURE TYPE | ENCAPSULATED |
| INDIVIDUAL SECTION QUANTITY | 2 |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 10.0 GIGOHMS |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM |
| NONDERATED VOLTAGE RATING AND TYPE | 500.0 DC CONTINUOUS ALL SECTIONS |
| TERMINAL TYPE AND QUANTITY | 4 TAB, SOLDER LUG |
| TEST DATA DOCUMENT | 81349-MIL-C-81 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.145 INCHES NOMINAL |