|
|
|
National Stock Number:
5910-00-499-6330
Federal Supply Class:
5910
National Item Identification Number:
004996330
Description:
CAPACITOR,FIXED,MICA DIELECTRIC
Detail:
A capacitor, whose capacitance value cannot be adjusted or varied, having natural sheet mica or reconstituted flaked mica formed into sheets as the dielectric material. It may be a single unit, or consist of two or more fixed units which cannot be separated.
|
Manufacturer Information:
| CM15BD050FP3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CM15CD050DP3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CM20BD050MP3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-5/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-PRF-5/1 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CM15CD050DP3 | 84171 | RHEINLANDER, ROBERT M | | MM15CD050DP | 72136 | ELECTRO MOTIVE CORP SUBSIDIARY OF INTERNATIONAL ELECTRONICS CORP |
|
Techincal Specification:
| BODY HEIGHT | 0.300 INCHES NOMINAL | | BODY LENGTH | 0.520 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, TERMINALS ON OPPOSITE SURFACES | | BODY WIDTH | 0.190 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 5.000 PICOFARADS SINGLE SECTION | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.0110 | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 10000.0 MEGOHMS | | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHMS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 500.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TEMP COEFFICIENT OF CAPACITANCE RANGE PER SECTION IN PPM PER DEG CELSIUS | -200.0 TO 200.0 SINGLE SECTION | | TERMINAL LENGTH | 1.120 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TEST DATA DOCUMENT | 81349-MILC5 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81349-MILC5-1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | TOLERANCE RANGE PER SECTION | -0.50 TO 0.50 PICOFARADS SINGLE SECTION |
|
|