|
|
|
National Stock Number:
5910-00-490-7847
Federal Supply Class:
5910
National Item Identification Number:
004907847
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 225P47492YB3 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 6D201-474A | 58364 | BYCAP INC | | 75F7R2C474 | 01002 | GENERAL ELECTRIC CO CAPACITORS DIV | | 711D1AG474PJ201AX | 56699 | BC COMPONENTS | | 711P1AG474PJ201A | 56699 | BC COMPONENTS | | CGM47-009 | 80103 | VEECO INSTRUMENTS INC LAMBDA DIV |
|
Techincal Specification:
| BODY HEIGHT | 0.480 INCHES MAXIMUM | | BODY LENGTH | 1.130 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES TERMINAL(S) ON ONE SURFACE | | BODY WIDTH | 0.732 INCHES MAXIMUM | | CAPACITANCE VALUE PER SECTION | 0.470 MICROFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.5000 | | INSULATION RESISTANCE AT REFERENCE TEMP | 20000.0 MEGOHM-MICROFARADS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | 500.0 SINGLE SECTION | | TERMINAL LENGTH | 1.625 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
|
|