|
|
|
National Stock Number:
5910-00-489-0050
Federal Supply Class:
5910
National Item Identification Number:
004890050
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 32PC6002G05 | 12673 | WESCO ELECTRICAL CO INC | | 32PC603G50 | 12673 | WESCO ELECTRICAL CO INC | | 7020034-17 | 10236 | ELECTRODYNAMICS INC | | PC115-06-100-2 | 27735 | SOUTHERN ELECTRONICS CO INC | | PC115-060-100-2 | 27735 | SOUTHERN ELECTRONICS CO INC | | C90084-17 | 32159 | WEST CAP ARIZONA |
|
Techincal Specification:
| BODY DIAMETER | 0.281 INCHES NOMINAL | | BODY LENGTH | 0.687 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 60000.000 PICOFARADS SINGLE SECTION | | DIELECTRIC MATERIAL | PLASTIC POLYCARBONATE | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.3000 | | INTERNAL ELECTRICAL CONNECTION TYPE | EXTENDED FOIL | | INSULATION RESISTANCE AT REFERENCE TEMP | 100000.0 MEGOHM-MICROFARADS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.025 INCHES NOMINAL | | TERMINAL LENGTH | 1.625 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
|
|