|
|
|
National Stock Number:
5910-00-488-9735
Federal Supply Class:
5910
National Item Identification Number:
004889735
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 036724 | 89305 | SIMMONDS PRECISION PRODUCTS INC | | 046-001848 | 26916 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | REA99 5-5-50 | 84411 | AMERICAN SHIZUKI CORP | | X463 5-5-50 | 84411 | AMERICAN SHIZUKI CORP | | X463UW5055-50W2 | 84411 | AMERICAN SHIZUKI CORP | | X463UW5055.50W2 | 84411 | AMERICAN SHIZUKI CORP | | X463UW5055R50W | 84411 | AMERICAN SHIZUKI CORP | | X463UW5059R50W | 84411 | AMERICAN SHIZUKI CORP | | X463UW5UFD50VDC | 84411 | AMERICAN SHIZUKI CORP |
|
Techincal Specification:
| BODY DIAMETER | 0.489 INCHES NOMINAL | | BODY LENGTH | 1.000 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 5.000 MICROFARADS SINGLE SECTION | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.3000 | | INSULATION RESISTANCE AT REFERENCE TEMP | 200000.0 MEGOHMS | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL LENGTH | 1.625 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TOLERANCE RANGE PER SECTION | -5.00 TO 5.00 PERCENT SINGLE SECTION |
|
|