|
|
|
National Stock Number:
5910-00-486-8851
Federal Supply Class:
5910
National Item Identification Number:
004868851
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 519522-1 | 64547 | HONEYWELL INTERNATIONAL, INC | | 519522-1 | 70210 | HONEYWELL INTERNATIONAL INC. | | ACV5109-1 | 00853 | CORNELL-DUBILIER MARKETING INC | | ACV5109-1 | 14655 | CORNELL-DUBILIER ELECTRONICS | | ACV5109-1 | 93790 | CORNELL-DUBILIER ELECTRONICS, INC. | | EP50607 | 99515 | ELECTRON PRODUCTS INC | | GF8232 | 07294 | GENISCO FILTER CORP | | GF8232 | 13050 | SPECTRUM CONTROL, INC. DIV API TECHNOLOGIES - EIS/WESSON | | RC00632-1 | 13619 | EMS DEVELOPMENT CORPORATION | | RC632-1 | 13619 | EMS DEVELOPMENT CORPORATION |
|
Techincal Specification:
| BODY DIAMETER | 1.120 INCHES NOMINAL | | BODY LENGTH | 1.623 INCHES NOMINAL | | CAPACITANCE VALUE PER SECTION | 1.000 MICROFARADS SINGLE SECTION | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO DIAMETER | 1.408 INCHES NOMINAL | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | INSULATION RESISTANCE AT REFERENCE TEMP | 1500.0 MEGOHMS | | MOUNTING FACILITY TYPE AND QUANTITY | 3 UNTHREADED MOUNTING HOLES | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 208.0 AC-RMS SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 100.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG | | TERMINAL SURFACE TREATMENT | SOLDER | | TEST DATA DOCUMENT | 70210-519522 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -10.00 TO 10.00 PERCENT SINGLE SECTION | | UNTHREADED MOUNTING HOLE DIAMETER | 0.140 INCHES MINIMUM AND 0.155 INCHES MAXIMUM |
|
|