| ADJUSTMENT DEVICE DRIVE TYPE AND QUANTITY | 1 SHAFT |
| ADJUSTMENT DEVICE TORQUE | 1.000 INCH-OUNCES MINIMUM AND 8.000 INCH-OUNCES MAXIMUM |
| BODY LENGTH | 1.205 INCHES NOMINAL |
| BODY STYLE | PISTON |
| CAPACITANCE RANGE IN PICOFARADS | +1.0 TO 42.0 SINGLE SECTION |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO DIAMETER | 0.235 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 0.703 INCHES NOMINAL |
| INCLOSURE TYPE | ENCASED |
| INSULATION DC RESISTANCE AT 25 DEG CELSIUS | 1000.0 GIGOHMS |
| OVERALL DIAMETER | 0.312 INCHES NOMINAL |
| OVERALL LENGTH | 1.330 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 TERMINAL |
| NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| NONDERATED VOLTAGE RATING AND TYPE | 1000.0 DC CONTINUOUS SINGLE SECTION |
| QUALITY FACTOR AT 25 DEG CELSIUS | 500.0 |
| SHAFT DIAMETER | 0.121 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.125 INCHES NOMINAL SINGLE SHAFT |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| TEMP COEFFICIENT OF CAPACITANCE RANGE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 SINGLE SECTION |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| TEST DATA DOCUMENT | 45413-112492-007 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |