5910-00-477-9433, CAPACITOR,FIXED,PLASTIC DIELECTR

5910-00-477-9437 CAPACITOR,FIXED,ELECTROLYTIC

National Stock Number:
5910-00-477-9433

Federal Supply Class:
5910

National Item Identification Number:
004779433

Description:
CAPACITOR,FIXED,PLASTIC DIELECTR

Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.

Manufacturer Information:

C55562-2	0TCV9	ARIZONA CAPACITORS, INC
C55562-2	32159	WEST CAP ARIZONA
C55562-2	96733	SFE TECHNOLOGIES

Techincal Specification:

BODY HEIGHT	1.688 INCHES MINIMUM AND 1.812 INCHES MAXIMUM
BODY LENGTH	1.938 INCHES MINIMUM AND 2.062 INCHES MAXIMUM
BODY STYLE	W/MTG TABS/FLANGES, TERMINAL(S) ON ONE SURFACE
BODY WIDTH	1.938 INCHES MINIMUM AND 2.062 INCHES MAXIMUM
CAPACITANCE VALUE PER SECTION	12.000 MICROFARADS SINGLE SECTION
CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH	1.062 INCHES NOMINAL
DIELECTRIC MATERIAL	PLASTIC POLYETHYLENE TEREPHTHALATE
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH	2.375 INCHES NOMINAL
INTERNAL ELECTRICAL CONNECTION TYPE	EXTENDED FOIL
MOUNTING FACILITY TYPE AND QUANTITY	2 UNTHREADED MOUNTING HOLES
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	200.0 DC SINGLE SECTION
NONDERATED OPERATING TEMP	85.0 CELSIUS MAXIMUM
RELIABILITY INDICATOR	NOT ESTABLISHED
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)
TERMINAL LENGTH	0.375 INCHES MINIMUM AND 0.499 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY	2 TAB, SOLDER LUG
TERMINAL SURFACE TREATMENT	SOLDER
TOLERANCE RANGE PER SECTION	-10.00 TO 10.00 PERCENT SINGLE SECTION
UNTHREADED MOUNTING HOLE DIAMETER	0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM

Click here to Register for Free 30-day Trial