|
|
|
National Stock Number:
5910-00-476-8220
Federal Supply Class:
5910
National Item Identification Number:
004768220
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 0160-3671 | 1LQK8 | KEYSIGHT TECHNOLOGIES, INC. | | 0160-3671 | 28480 | HEWLETT-PACKARD COMPANY | | 234025 | 04901 | BOONTON ELECTRONICS CORPORATION | | 356C333P0RM2PCT | 06509 | ENGINEERED MAGNETICS, INC. | | 356C333PORM2PCT | 06509 | ENGINEERED MAGNETICS, INC. | | 0160-3671 | 7ZXR5 | KEYSIGHT TECHNOLOGIES INC | | HEW-253 | 84411 | AMERICAN SHIZUKI CORP |
|
Techincal Specification:
| BODY DIAMETER | 0.255 INCHES MAXIMUM | | BODY LENGTH | 0.656 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 0.033 MICROFARADS SINGLE SECTION | | DIELECTRIC MATERIAL | PLASTIC POLYESTER | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 1.0000 | | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 15000.0 MEGOHMS | | INSULATION RESISTANCE AT REFERENCE TEMP | 150000.0 MEGOHMS | | INTERNAL ELECTRICAL CONNECTION TYPE | EXTENDED FOIL | | MATERIAL | PLASTIC CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 200.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL DIAMETER | 0.025 INCHES NOMINAL | | TERMINAL LENGTH | 1.250 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TERMINAL SURFACE TREATMENT | SOLDER | | TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
|
|