|
|
|
National Stock Number:
5910-00-464-4680
Federal Supply Class:
5910
National Item Identification Number:
004644680
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 10189347-2 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 457-5811 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | P185751 | 01884 | EXXELIA USA, INC. | | P185751 | 56289 | SPRAGUE ELECTRIC CO WORLD HQS | | 5910004644680 | SCY13 | E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE |
|
Techincal Specification:
| BODY DIAMETER | 0.780 INCHES MAXIMUM | | BODY LENGTH | 2.156 INCHES MAXIMUM | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 10.000 MICROFARADS SINGLE SECTION | | CASE INSULATION MATERIAL | PLASTIC | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | INSULATION RESISTANCE AT REFERENCE TEMP | 50000.0 MEGOHM-MICROFARADS | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 100.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 85.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TEMP COEFFICIENT OF CAPACITANCE PER SECTION IN PPM PER DEG CELSIUS | -7.0 SINGLE SECTION | | TERMINAL DIAMETER | 0.028 INCHES NOMINAL | | TERMINAL LENGTH | 1.625 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | COPPER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TEST DATA DOCUMENT | 18876-10189347 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | TOLERANCE RANGE PER SECTION | -2.00 TO 2.00 PERCENT SINGLE SECTION |
|
|