|
|
|
National Stock Number:
5910-00-451-5596
Federal Supply Class:
5910
National Item Identification Number:
004515596
Description:
CAPACITOR,FIXED,PLASTIC DIELECTR
Detail:
A capacitor whose capacitance value cannot be adjusted or varied, having a plastic, plastic film, plasticized (plastic impregnated) paper, or any combination of plastic and paper or plastic and paper films as the dielectric material. The plastic may be one or more types of synthetic compounds such as polyesters, polyfluorides, polycabonates, and the like. It may be a single unit, or consist of two or more fixed units which cannot be separated. For items whose electrodes consist of a metallic film deposited (metallized) on the dielectric material, see CAPACITOR, FIXED, METALLIZED, PAPER-PLASTIC DIELECTRIC.
|
Manufacturer Information:
| 247AS-C1097-013 | 53711 | NAVAL SEA SYSTEMS COMMAND | | C605004941 | 88818 | KEARFOTT CORPORATION | | F410A103S1 | 00213 | STRUTHERS-DUNN INC. | | D12B102FSW | 12517 | COMPONENT RESEARCH CO INC | | D12B103FS | 12517 | COMPONENT RESEARCH CO INC | | F410A103S1 | 72928 | GULTON INDUSTRIES INC GUDEMAN DIV | | MPAC10001D0-5AXST | 01378 | SPELLMAN HIGH-VOLTAGE ELECTRONICS CORPORATION | | LP130-8F | 01884 | EXXELIA USA, INC. | | KFT2-1 | 84411 | AMERICAN SHIZUKI CORP | | HL0-5-103BXST | 99515 | ELECTRON PRODUCTS INC |
|
Techincal Specification:
| BODY DIAMETER | 0.174 INCHES NOMINAL | | BODY LENGTH | 0.531 INCHES NOMINAL | | BODY STYLE | W/O MTG FACILITIES, AXIAL TERMINALS | | CAPACITANCE VALUE PER SECTION | 10000.000 PICOFARADS SINGLE SECTION | | CASE INSULATION MATERIAL | PLASTIC | | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.2000 | | FEATURES PROVIDED | HERMETICALLY SEALED CASE | | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 50.0 DC SINGLE SECTION | | NONDERATED OPERATING TEMP | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) | | TERMINAL LENGTH | 1.500 INCHES MINIMUM | | TERMINAL SURFACE TREATMENT | SOLDER | | TERMINAL TYPE AND QUANTITY | 2 UNINSULATED WIRE LEAD | | TOLERANCE RANGE PER SECTION | -1.00 TO 1.00 PERCENT SINGLE SECTION |
|
|