5905-00-552-5475 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5905-00-552-5477 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-552-5476

Federal Supply Class:
5905

National Item Identification Number:
005525476

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
1191-580249BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
16R88079-432410001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
240-1210P2149956RAYTHEON COMPANY
240-1316P2249956RAYTHEON COMPANY
300151-25402145RICHARDS IMAGERY INTERPRETATION SYSTEMS L.L.C.
311-06180009TEKTRONIX, INC.
40142828835HOBART BROS CO
416037-2296214RAYTHEON COMPANY
4370111237CTS CORP OF CALIFORNIA DBA CTS ELECTRONICS CORP PASO ROBLES DIV ELECTROMECHANICAL GROUP
480268PC12510001NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
53C3-250K12697CLAROSTAT SENSORS AND CONTROLS
60009-03521439CURTISS-WRIGHT FLOW CONTROL SERVICE, LLC
759948019204ARMY, UNITED STATES DEPARTMENT OF THE
7700535P33003538LOCKHEED MARTIN CORPORATION
7700535P33099971LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS
87501121ROCKWELL AUTOMATION, INC.
911101218876U S ARMY AVIATION AND MISSILE COMMAND
ACS7-254M71590CRL COMPONENTS INC
CMU254144655OHMITE HOLDING, L.L.C.
JA1N048S254MA01121ROCKWELL AUTOMATION, INC.
JA1N056S254UA01121ROCKWELL AUTOMATION, INC.
JA2L048P254UC01121ROCKWELL AUTOMATION, INC.
JA2N056S254UA01121ROCKWELL AUTOMATION, INC.
JU2541SD305601121ROCKWELL AUTOMATION, INC.
K211R113282187NATIONAL WEATHER SERVICE
MIL-PRF-94/581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MILR94-581349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
P7770835P3024454GENERAL ELECTRIC CO ELECTRONIC COMPONENTS DIVISION OF ELECTRONIC ATOMIC AND DEFENSE SYSTEMS GROUP
PT1191-580249BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC.
RV3ATSC254B81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV4ATSA254B81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV4ATSD254B81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV4NAXSD254A81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV4NAY50254A81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RV4NAYSD254A81349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
ELECTRICAL RESISTANCE PER SECTION250.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
BODY DIAMETER1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM
BODY LENGTH0.468 INCHES MINIMUM AND 0.656 INCHES MAXIMUM
BODY STYLECYLINDRICAL BUSHING MOUNTED
DEVICE DESIGN TYPENONTURN AT 9 OCLOCK
OVERALL DIAMETER1.515 INCHES MAXIMUM
OVERALL LENGTH1.312 INCHES MINIMUM AND 1.562 INCHES MAXIMUM
MAXIMUM STARTING TORQUE6.00 INCH-OUNCES
MAXIMUM STOP TORQUE128.00 INCH-OUNCES
MOUNTING BUSHING LENGTH0.344 INCHES MINIMUM AND 0.390 INCHES MAXIMUM
MOUNTING METHODSTANDARD BUSHING
NONTURN DEVICE RADIUS0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG309.0 MINIMUM AND 320.0 MAXIMUM
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD QUANTITY PER INCH32.0
SCREW THREAD SERIES DESIGNATORUNEF
SECTION QUANTITY1
SHAFT DIAMETER0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
SHAFT LENGTH0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA81349-MIL-R-94/5 GOVERNMENT SPECIFICATION
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
TEST DATA DOCUMENT81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us