| SCREW THREAD QUANTITY PER INCH | 32.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 2 |
| SHAFT BEARING TYPE | BEARING |
| SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SHAFT LENGTH | 0.750 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.005 INCHES |
| SHAFT STYLE | ROUND, SLOTTED |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -0.2 TO 0.2 ALL SECTIONS |
| TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| UNDERCUT DIAMETER | 1.625 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0320 INCHES NOMINAL |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 352.0 MINIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 2.0 KILOHMS ALL SECTIONS |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 55.0 ALL SECTIONS |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 60.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 120.0 |
| BODY DIAMETER | 1.625 INCHES NOMINAL |
| BODY LENGTH | 1.000 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FEATURES PROVIDED | HUMIDITY PROOF AND NONMETALLIC SHAFT |
| FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 ALL SECTIONS |
| III CUBIC MEASURE | 2.074 CUBIC INCHES |
| III FRAGILITY FACTOR | MODERATELY RUGGED |
| PILOT DIAMETER | 0.7490 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| PILOT LENGTH | 0.0781 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 3 |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.000 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL |
| MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |