|
|
|
National Stock Number:
5905-00-549-1942
Federal Supply Class:
5905
National Item Identification Number:
005491942
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 12Z13110-9443 | 94135 | NAVAL ORDNANCE STANDARDS | | RV2S761A | 99957 | BOWMAR/TIC INC SUB OF BOWMAR INSTRUMENT CORP |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 320.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 2.000 KILOHMS 1ST SECTION AND 200.000 KILOHMS 2ND SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | DOUBLE ENDED SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 165.0 ALL SECTIONS | | BODY DIAMETER | 2.109 INCHES NOMINAL | | BODY LENGTH | 2.171 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FRAGILITY FACTOR | RUGGED | | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR | | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.20 TO 0.20 ALL SECTIONS | | LATERAL RUNOUT | 0.001 INCHES | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 2.0000 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 1.8750 INCHES NOMINAL | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | PILOT DIAMETER RUNOUT | 0.00100 INCHES | | POWER DISSIPATION RATING PER SECTION IN WATTS | 4.0 FREE AIR ALL SECTIONS | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 ALL SECTIONS | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 2 | | SHAFT BEARING TYPE | BALL | | SHAFT DIAMETER | 0.250 INCHES NOMINAL | | SHAFT RUNOUT | 0.001 INCHES | | SHAFT STYLE | ROUND | | SHAFT LENGTH | 0.938 INCHES NOMINAL | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 ALL SECTIONS | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD | | TEST DATA DOCUMENT | 94135-12Z13110-9443 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | UNDERCUT DIAMETER | 1.875 INCHES MAXIMUM | | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
|
|