5905-00-515-2188, RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5905-00-515-2188

Federal Supply Class:
5905

National Item Identification Number:
005152188

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

MIL-R-22097/5	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RJ26CP502	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	3600.0 MINIMUM AND 9000.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	5.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BODY HEIGHT	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
BODY LENGTH	0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
BODY STYLE	RECTANGULAR
BODY WIDTH	0.155 INCHES MINIMUM AND 0.195 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CUBIC MEASURE	0.011 CUBIC INCHES
FEATURES PROVIDED	HUMIDITY PROOF
FRAGILITY FACTOR	MODERATELY RUGGED
MAXIMUM RUNNING TORQUE	3.00 INCH-OUNCES
MAXIMUM STARTING TORQUE	3.00 INCH-OUNCES
MOUNTING METHOD	TERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS	0.25 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	4320.0 NOMINAL
SECTION QUANTITY	1
SHAFT BEARING TYPE	SLEEVE
SHAFT LENGTH	0.050 INCHES MAXIMUM
SHAFT DIAMETER	0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
SPECIFICATION/STANDARD DATA	81349-MIL-R-22097/5 GOVERNMENT SPECIFICATION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-250.0 TO 250.0 SINGLE SECTION
TERMINAL LOCATION	LOWER ADJACENT SIDE TWO ROWS
TERMINAL LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial