| ELECTRICAL RESISTANCE | 1.500 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 1.000 KILOHMS LOWEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 2.000 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 2.200 KILOHMS 3RD INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 6.000 KILOHMS HIGHEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 4.950 KILOHMS 4TH INTERMEDIATE RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 150.0 |
| BODY HEIGHT | 0.100 INCHES MAXIMUM |
| BODY LENGTH | 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| BODY WIDTH | 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 3RD INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 4TH INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 HIGHEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 1 LOWEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 1ST INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 3 2ND INTERMEDIATE RESISTANCE VALUE |
| INCLOSURE METHOD | ENCAPSULATED |
| POWER DISSIPATION RATING IN WATTS | 0.150 EACH RESISTOR |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| SCHEMATIC DIAGRAM DESIGNATOR | SERIES NETWORK |
| STYLE DESIGNATOR | FLAT PACK |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -200.0 TO 200.0 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 125.0 |
| TERMINAL LENGTH | 0.120 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| TERMINAL QUANTITY | 14 |
| TERMINAL TYPE | PIN |
| TEST DATA DOCUMENT | 06481-912085 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |