|
|
|
National Stock Number:
5905-00-493-4864
Federal Supply Class:
5905
National Item Identification Number:
004934864
Description:
RESISTOR,FIXED,WIRE WOUND
Detail:
INC 37404 REINSTATED ON 010303~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The items must have inherent characteristics of inducing little or no self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, INDUCTIVE.
|
Manufacturer Information:
| 35TR0R450HM | 16119 | GAMBLE CHARLES T INDUSTRIES | | 35TR0R450HM | 63743 | WARD LEONARD CT LLC | | 35TR0R45OHM | 16119 | GAMBLE CHARLES T INDUSTRIES | | 481337-3 | 3B150 | RAYTHEON COMPANY | | 35TR450HMS | 63743 | WARD LEONARD CT LLC | | 35TR45OHMS | 63743 | WARD LEONARD CT LLC | | LN50J4K5 | 44655 | OHMITE HOLDING, L.L.C. | | 481337-3 | 49956 | RAYTHEON COMPANY | | 481337-3 | 54X10 | RAYTHEON COMPANY | | 481337-3 | 5D832 | RAYTHEON COMPANY |
|
Techincal Specification:
| ELECTRICAL RESISTANCE | 0.450 OHMS | | AMBIENT TEMP AT FULL RATED POWER | 40.0 CELSIUS | | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 340.0 | | BODY DIAMETER | 0.594 INCHES NOMINAL | | BODY LENGTH | 4.062 INCHES NOMINAL | | INCLOSURE TYPE | ENCAPSULATED | | POWER DISSIPATION RATING IN WATTS | 35.000 FREE AIR | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE IN PERCENT | -10.000 TO 10.000 | | STYLE DESIGNATOR | RADIAL TERMINAL EACH END | | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -400.0 TO 400.0 | | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -34.0 TO 85.0 | | TERMINAL LENGTH | 0.563 INCHES NOMINAL | | TERMINAL TYPE | TAB, SOLDER LUG | | TEST DATA DOCUMENT | 49956-481337 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|