5905-00-484-2894, RESISTOR,VARIABLE,NONWIRE WOUND,

5910-00-484-2885 CAPACITOR,FIXED,ELECTROLYTIC

5910-00-484-2895 CAPACITOR,FIXED,CERAMIC DIELECTR

National Stock Number:
5905-00-484-2894

Federal Supply Class:
5905

National Item Identification Number:
004842894

Description:
RESISTOR,VARIABLE,NONWIRE WOUND,

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.

Manufacturer Information:

138-108-3104	95542	NORTHROP GRUMMAN SYSTEMS CORPORATION
3251W1-104	80294	BOURNS INSTRUMENTS INC
MIL-PRF-22097/3	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-R-22097/3	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
RJ22CW104	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
418126-45	96214	RAYTHEON COMPANY

Techincal Specification:

EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION	7200.0 MINIMUM AND 16200.0 MAXIMUM
ELECTRICAL RESISTANCE PER SECTION	100.0 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURE	CLUTCH
ACTUATOR TYPE	SINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER	85.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER	150.0 SINGLE SECTION
BODY HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
BODY LENGTH	0.535 INCHES MINIMUM AND 0.540 INCHES MAXIMUM
BODY STYLE	RECTANGULAR
BODY WIDTH	0.180 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL	0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
OVERALL HEIGHT	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
OVERALL LENGTH	0.747 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
OVERALL WIDTH	0.180 INCHES MINIMUM AND 0.230 INCHES MAXIMUM
MAXIMUM RUNNING TORQUE	5.00 INCH-OUNCES
MAXIMUM STARTING TORQUE	5.00 INCH-OUNCES
MOUNTING METHOD	TERMINAL
POWER DISSIPATION RATING PER SECTION IN WATTS	0.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATOR	NOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT	-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG	7200.0 MINIMUM AND 16200.0 MAXIMUM
SECTION QUANTITY	1
SHAFT DIAMETER	0.058 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
SHAFT BEARING TYPE	BEARING
SHAFT LENGTH	0.040 INCHES MINIMUM AND 0.045 INCHES MAXIMUM
SHAFT STYLE	ROUND, SLOTTED
SPECIFICATION/STANDARD DATA	81349-MIL-R-22097/3 GOVERNMENT SPECIFICATION
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS	-250.0 TO 250.0 SINGLE SECTION
TERMINAL LENGTH	0.172 INCHES MINIMUM AND 0.177 INCHES MAXIMUM
TERMINAL LOCATION	REAR END
TERMINAL TYPE AND QUANTITY	3 PIN
TEST DATA DOCUMENT	81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial