|
|
|
National Stock Number:
5905-00-483-7455
Federal Supply Class:
5905
National Item Identification Number:
004837455
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 138-062-2101 | 95542 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 3250P1-101 | 80294 | BOURNS INSTRUMENTS INC |
|
Techincal Specification:
| OVERALL LENGTH | 0.530 INCHES NOMINAL | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT STYLE | ROUND, SLOTTED | | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.520 INCHES NOMINAL | | BODY STYLE | RECTANGULAR W/MOUNTING HOLES | | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES | | OVERALL WIDTH | 0.720 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 100.000 OHMS SINGLE SECTION | | TERMINAL TYPE AND QUANTITY | 3 PIN | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL | | TEST DATA DOCUMENT | 95542-138-062 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION | | MOUNTING METHOD | UNTHREADED HOLE | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | RELIABILITY INDICATOR | NOT ESTABLISHED | | SHAFT LENGTH | 0.030 INCHES NOMINAL | | OVERALL HEIGHT | 0.500 INCHES NOMINAL | | TERMINAL LENGTH | 0.500 INCHES NOMINAL | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING HOLE DIAMETER | 0.078 INCHES NOMINAL | | SHAFT DIAMETER | 0.083 INCHES NOMINAL | | BODY HEIGHT | 0.500 INCHES NOMINAL | | BODY WIDTH | 0.220 INCHES NOMINAL | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 9000.0 NOMINAL | | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH | | BODY LENGTH | 0.500 INCHES NOMINAL |
|
|