|
|
|
National Stock Number:
5905-00-482-6453
Federal Supply Class:
5905
National Item Identification Number:
004826453
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 311-0860-00 | 80009 | TEKTRONIX, INC. | | BC87293 | 11237 | CTS CORP OF CALIFORNIA DBA CTS ELECTRONICS CORP PASO ROBLES DIV ELECTROMECHANICAL GROUP |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION | | BODY DIAMETER | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM | | BODY LENGTH | 0.496 INCHES MINIMUM AND 0.531 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FEATURES PROVIDED | HUMIDITY PROOF | | III FRAGILITY FACTOR | MODERATELY RUGGED | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING BUSHING LENGTH | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING | | NONTURN DEVICE LOCATION | AT 9 OCLOCK | | NONTURN DEVICE RADIUS | 0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT BEARING TYPE | SLEEVE | | SHAFT DIAMETER | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM | | SHAFT LENGTH | 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -150.0 TO 150.0 SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|