| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| ELECTRICAL RESISTANCE PER SECTION | 5.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| BODY HEIGHT | 0.300 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| BODY LENGTH | 1.218 INCHES MINIMUM AND 1.282 INCHES MAXIMUM |
| BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| BODY WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.690 INCHES MINIMUM AND 0.710 INCHES MAXIMUM |
| CUBIC MEASURE | 0.084 CUBIC INCHES |
| FEATURES PROVIDED | HUMIDITY PROOF |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING HOLE DIAMETER | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| MOUNTING METHOD | UNTHREADED HOLE |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 6120.0 MINIMUM AND 9720.0 MAXIMUM |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.100 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| SHAFT BEARING TYPE | BEARING |
| SHAFT LENGTH | 0.036 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| SHAFT STYLE | ROUND, SLOTTED |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| TERMINAL LENGTH | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| TEST DATA DOCUMENT | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |