|
|
|
National Stock Number:
5905-00-470-5067
Federal Supply Class:
5905
National Item Identification Number:
004705067
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 2-714-2 | 10112 | GENERAL DYNAMICS MOTION CONTROL LLC | | 58860-2 | 82340 | L3HARRIS TECHNOLOGIES, INC. | | 58860-2 | 98659 | DONEL SYSTEMS LLC | | 58860-2 | 9Y580 | L3HARRIS TECHNOLOGIES, INC. |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 65.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BEARING TYPE | BEARING SHAFT | | BODY DIAMETER | 1.437 INCHES NOMINAL | | BODY LENGTH | 1.250 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL SERVO MOUNTED | | FEATURES PROVIDED | HUMIDITY PROOF | | FIXED TAP QUANTITY PER SECTION | 2 SINGLE SECTION | | FRAGILITY FACTOR | MODERATELY RUGGED | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION PROPORTIONAL CONFORMITY | | MAXIMUM RUNNING TORQUE | 0.40 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.40 INCH-OUNCES | | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 0.25 | | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL | | MOUNTING LIP DIAMETER | 1.4370 INCHES NOMINAL | | MOUNTING METHOD | CLAMP RING | | PILOT DIAMETER | 1.31200 INCHES MINIMUM AND 1.31250 INCHES MAXIMUM | | PILOT LENGTH | 0.0620 INCHES NOMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.1249 INCHES MAXIMUM | | SHAFT LENGTH | 0.750 INCHES NOMINAL | | SHAFT STYLE | ROUND | | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 2222.0 SINGLE SECTION AND 2222.0 SINGLE SECTION | | TAP LOCATION TOLERANCE PER SECTION | -5.0 TO 5.0 OHMS SINGLE SECTION | | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 5 TURRET | | TEST DATA DOCUMENT | 82340-58860 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | UNDERCUT DIAMETER | 1.312 INCHES NOMINAL | | UNDERCUT WIDTH | 0.0730 INCHES NOMINAL |
|
|