|
|
|
National Stock Number:
5905-00-468-4082
Federal Supply Class:
5905
National Item Identification Number:
004684082
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 928119 | 08904 | CONRAC SYSTEMS INC | | 928119 | 18672 | CONRAC,INC. | | UPM70RE50KLT30PCT | 34263 | CTS CORP IN TEXAS DBA CTS ELECTRONICS CORP BROWNSVILLE DIV | | 928119 | 64959 | AMERICAN TELEPHONE AND TELEGRAPH CO |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 50.000 KILOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 55.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION | | BODY DIAMETER | 0.656 INCHES NOMINAL | | BODY LENGTH | 0.469 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FEATURES PROVIDED | GROUNDED CONTACT ARM | | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL | | MOUNTING FACILITY QUANTITY | 2 | | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.2 FREE AIR SINGLE SECTION | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -30.0 TO 30.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.119 INCHES NOMINAL | | SHAFT LENGTH | 0.125 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG | | TEST DATA DOCUMENT | 18672-928119 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|