| ELECTRICAL RESISTANCE | 1.000 KILOHMS 1ST INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 3.000 KILOHMS 3RD INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 2.000 KILOHMS 2ND INTERMEDIATE RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 680.000 OHMS LOWEST RESISTANCE VALUE |
| ELECTRICAL RESISTANCE | 7.000 KILOHMS HIGHEST RESISTANCE VALUE |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 125.0 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 185.0 |
| BODY HEIGHT | 0.100 INCHES MAXIMUM |
| BODY LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| BODY WIDTH | 0.685 INCHES MINIMUM AND 0.695 INCHES MAXIMUM |
| CUBIC MEASURE | 0.018 CUBIC INCHES |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 1ST INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 HIGHEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 2 LOWEST RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 4 3RD INTERMEDIATE RESISTANCE VALUE |
| IDENTICAL VALUE RESISTOR QUANTITY | 6 2ND INTERMEDIATE RESISTANCE VALUE |
| INCLOSURE METHOD | ENCAPSULATED |
| POWER DISSIPATION RATING IN WATTS | 0.500 TOTAL NETWORK |
| PRECIOUS MATERIAL AND LOCATION | TERMINAL SURFACES GOLD |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE IN PERCENT | -4.000 TO 4.000 |
| STYLE DESIGNATOR | FLAT PACK |
| TERMINAL QUANTITY | 24 |
| TERMINAL TYPE | PIN |
| TEST DATA DOCUMENT | 13973-860644 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |