| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ACTUATOR TYPE | SINGLE SHAFT |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 180.0 |
| ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| BEARING TYPE | BALL SHAFT |
| BODY DIAMETER | 0.750 INCHES NOMINAL |
| BODY LENGTH | 0.812 INCHES NOMINAL |
| BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25 TO 0.25 SINGLE SECTION |
| LATERAL RUNOUT | 0.001 INCHES |
| OVERALL DIAMETER | 0.750 INCHES NOMINAL |
| OVERALL LENGTH | 1.660 INCHES NOMINAL |
| MAXIMUM RUNNING TORQUE | 0.10 INCH-OUNCES |
| MAXIMUM STARTING TORQUE | 0.10 INCH-OUNCES |
| MOUNTING FACILITY QUANTITY | 2 |
| MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING LIP DEPTH | 0.0620 INCHES NOMINAL |
| MOUNTING LIP DIAMETER | 0.7500 INCHES NOMINAL |
| MOUNTING METHOD | THREADED HOLE |
| PILOT LENGTH | 0.0620 INCHES NOMINAL |
| PILOT DIAMETER RUNOUT | 0.001 INCHES |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 1.5 FREE AIR SINGLE SECTION |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 6.0 |
| SCREW THREAD SERIES DESIGNATOR | UNC |
| SECTION QUANTITY | 1 |
| SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| SHAFT LENGTH | 0.660 INCHES NOMINAL |
| SHAFT RADIAL PLAY | 0.0008 INCHES |
| SHAFT RUNOUT | 0.001 INCHES |
| SHAFT END PLAY | 0.0005 INCHES |
| SHAFT STYLE | ROUND, STEPPED |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 333.0 SINGLE SECTION |
| TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 9347.2 SINGLE SECTION |
| TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 DEG ANGULAR ROTATION SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -30.0 TO 30.0 SINGLE SECTION |
| TERMINAL LOCATION | REAR END |
| TERMINAL TYPE AND QUANTITY | 4 SOLDER STUD |
| UNDERCUT DIAMETER | 0.687 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.062 INCHES NOMINAL |
| UNDERCUT LENGTH | 0.170 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |