|
|
|
National Stock Number:
5905-00-459-5431
Federal Supply Class:
5905
National Item Identification Number:
004595431
Description:
RESISTOR,VARIABLE,NONWIRE WOUND,
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
| 311-0121-01 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | 311-0121-01 | 80009 | TEKTRONIX, INC. | | CM22218 | 12697 | CLAROSTAT SENSORS AND CONTROLS | | BA811-4367 | 71590 | CRL COMPONENTS INC | | BA811-4367HV2 | 71590 | CRL COMPONENTS INC |
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 15.0 MEGOHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION | | BODY DIAMETER | 0.750 INCHES MAXIMUM | | BODY LENGTH | 0.469 INCHES MAXIMUM | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW | | III OVERALL LENGTH | 1.219 INCHES NOMINAL | | III OVERALL DIAMETER | 0.750 INCHES MAXIMUM | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING BUSHING LENGTH | 0.375 INCHES MAXIMUM | | MOUNTING METHOD | STANDARD BUSHING AND CLAMP RING | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -50.0 TO 50.0 SINGLE SECTION | | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.251 INCHES MAXIMUM | | SHAFT LENGTH | 0.300 INCHES NOMINAL | | SHAFT STYLE | ROUND | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
|
|