|
|
|
National Stock Number:
5905-00-459-1776
Federal Supply Class:
5905
National Item Identification Number:
004591776
Description:
RESISTOR,VARIABLE,WIRE WOUND,PRE
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE, For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
|
Manufacturer Information:
| 162-1K | 02111 | VISHAY SPRAGUE INC | | 162-1K | C7407 | IV-ELECTRONIC KLAUS VESPERMANN KG | | DS101267-1 | 08241 | LOCKHEED MARTIN CORP LOCKHEED MARTIN MISSION SYSTEMS |
|
Techincal Specification:
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 NOMINAL | | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION | | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION | | BEARING TYPE | SLEEVE SHAFT | | BODY DIAMETER | 0.500 INCHES NOMINAL | | BODY LENGTH | 1.000 INCHES NOMINAL | | BODY STYLE | CYLINDRICAL BUSHING MOUNTED | | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR | | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY | | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.30 TO 0.30 SINGLE SECTION | | OVERALL DIAMETER | 0.500 INCHES NOMINAL | | OVERALL LENGTH | 1.810 INCHES NOMINAL | | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES | | MAXIMUM STARTING TORQUE | 0.80 INCH-OUNCES | | MAXIMUM STOP TORQUE | 20.00 INCH-OUNCES | | MOUNTING BUSHING LENGTH | 0.240 INCHES NOMINAL | | MOUNTING METHOD | STANDARD BUSHING | | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 NOMINAL | | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL | | SCREW THREAD QUANTITY PER INCH | 32.0 | | SCREW THREAD SERIES DESIGNATOR | UNEF | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.281 INCHES NOMINAL | | SHAFT LENGTH | 0.690 INCHES NOMINAL | | SHAFT RADIAL PLAY | 0.003 INCHES | | SHAFT END PLAY | 0.010 INCHES | | SHAFT STYLE | ROUND, SLOTTED | | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -20.0 TO 20.0 SINGLE SECTION | | TERMINAL LOCATION | REAR END | | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD | | TEST DATA DOCUMENT | 08241-DS101267 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|