5905-00-456-0621 RESISTOR,VARIABLE,WIRE WOUND,NON Index 5905-00-456-0623 RESISTOR,VARIABLE,WIRE WOUND,NON

National Stock Number:
5905-00-456-0622

Federal Supply Class:
5905

National Item Identification Number:
004560622

Description:
RESISTOR,VARIABLE,WIRE WOUND,NON

Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.


Manufacturer Information:
68A7100P20302989GENERAL ELECTRIC CO GE DRIVE SYSTEMS GOVERNMENT BUSINESS OPN
68A7125P20302989GENERAL ELECTRIC CO GE DRIVE SYSTEMS GOVERNMENT BUSINESS OPN


Techincal Specification:
EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION5400.0 NOMINAL
ELECTRICAL RESISTANCE PER SECTION20.000 KILOHMS SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURECLUTCH
ACTUATOR TYPESINGLE SHAFT
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER25.0 SINGLE SECTION
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 SINGLE SECTION
BODY HEIGHT0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM
BODY LENGTH0.905 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
BODY STYLERECTANGULAR W/MOUNTING HOLES/SLOTS
BODY WIDTH0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS0.825 INCHES MINIMUM AND 0.835 INCHES MAXIMUM
MOUNTING FACILITY QUANTITY2
MOUNTING HOLE DIAMETER0.086 INCHES NOMINAL
MOUNTING METHODUNTHREADED HOLE
POWER DISSIPATION RATING PER SECTION IN WATTS0.5 FREE AIR SINGLE SECTION
RELIABILITY INDICATORNOT ESTABLISHED
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG5400.0 NOMINAL
SECTION QUANTITY1
SHAFT DIAMETER0.115 INCHES NOMINAL
SHAFT LENGTH0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS-100.0 TO 100.0 SINGLE SECTION
TERMINAL LOCATIONLOWER ADJACENT SIDE TWO ROWS
TERMINAL LENGTH0.185 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
TERMINAL TYPE AND QUANTITY3 PIN


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us