|
|
|
National Stock Number:
5905-00-448-5336
Federal Supply Class:
5905
National Item Identification Number:
004485336
Description:
RESISTOR,VARIABLE,WIRE WOUND,NON
Detail:
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
|
Manufacturer Information:
|
Techincal Specification:
| ELECTRICAL RESISTANCE PER SECTION | 17.0 OHMS SINGLE SECTION | | ACTUATOR TYPE | SINGLE SHAFT | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 50.0 SINGLE SECTION | | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION | | BODY HEIGHT | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM | | BODY LENGTH | 1.265 INCHES MINIMUM AND 1.297 INCHES MAXIMUM | | BODY STYLE | RECTANGULAR | | BODY WIDTH | 0.265 INCHES MINIMUM AND 0.297 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.300 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.695 INCHES MINIMUM AND 0.705 INCHES MAXIMUM | | FEATURES PROVIDED | NONMETALLIC SHAFT AND HUMIDITY PROOF | | MOUNTING METHOD | TERMINAL | | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.1 FREE AIR SINGLE SECTION | | RELIABILITY INDICATOR | NOT ESTABLISHED | | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0 TO 5.0 SINGLE SECTION | | SECTION QUANTITY | 1 | | SHAFT DIAMETER | 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM | | SHAFT LENGTH | 0.125 INCHES NOMINAL | | SHAFT STYLE | ROUND, SLOTTED | | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS | | TERMINAL LENGTH | 0.250 INCHES MINIMUM | | TERMINAL TYPE AND QUANTITY | 3 PIN |
|
|